Ritzy One • User Manual • Payroll add-on

Timesheet

Record the hours every employee works each day — by job, site and location — and let Ritzy work out the scheduled hours, overtime, short hours and leave. At month end, post the overtime and leave deductions straight into Payroll, then run the salary as usual.

Applies to Ritzy One (web)  |  Audience: site supervisors, HR & Payroll users  |  Needs the Payroll module  |  Sign in as ADMIN for set-up

1 What is Timesheet?

Timesheet is an add-on to Payroll, licensed on its own. Payroll pays a monthly salary; Timesheet adds what really happened each day: who worked, where, for how long, and who was away. From that it works out the month’s overtime to pay and the absence to deduct, and hands both to Payroll.

What you get

  • A daily sheet per department, one row per employee.
  • Up to four slots a day, each with its own job, site and location, and two breaks.
  • Scheduled hours from the work week, public holidays and each employee’s own schedule (Ramadan hours, say).
  • Overtime, short hours and leave days worked out as you type.
  • One click to post the month into Additions / Deductions; one to take it back.
  • Hours reports by job, site, location, department, employee, day or month.

Where it lives

Timesheet does not get a menu of its own. When it is installed, Payroll gains a Timesheet section with three screens:

  • Timesheet — enter a department’s day.
  • Post Timesheet — the monthly summary, posting, and the settings.
  • Timesheet Reports — hours for any date range, and HR’s Verification of the month.

The Work Location and Work Site masters appear under Payroll › Masters, and the Employee Master gets a Timesheet tab.

The Help button on any of the three Timesheet screens opens this manual.

The month at a glance

Set up once → Enter each day → Check the Monthly Summary → Post Timesheet → Salary Process

2 Before you start

3 Settings, work week & holidays

Open Tools › Preferences › Timesheet Settings (shown to users with the Post Timesheet right). Click Save at the top after changing the hours, payments or work week.

Tools › Preferences › Timesheet Settings
Hours and Payments
8
1.25
Timesheet Overtime
Timesheet Leave Deduction
Annual Leave
The company-wide hours and the two payroll components the month posts to.
SettingWhat it does
Normal HoursThe hours of an ordinary working day (0–24). Used for any day the work week does not give its own hours.
Overtime FactorThe multiplier for overtime pay: 1.25 is time and a quarter, 1.5 time and a half. An employee can have their own.
Overtime PaymentThe addition (pay type 3) overtime is posted as.
Leave DeductionThe deduction (pay type 4) leave and short hours are posted as.
Annual Leave TypeThe leave type that counts as annual leave. It is deducted on salary and allowances, because leave salary is paid separately.
Home LocationThe work location that hours worked from home are booked to (see section 13). Left blank, a work location named Home is used if there is one.

Work Week

Tick the days that are working days. A day’s Hours can differ from the normal hours — a short Thursday of 5 hours, for instance. A day that is not ticked has no scheduled hours, so every hour worked on it is overtime. Until the work week is set, every day has the normal hours (a tag says so).

The Payroll weekly holiday is always a day off
The weekly holiday set in Payroll Settings (for example Friday, from the month it starts) has no scheduled hours on the timesheet either, whatever the work week or the employee’s own hours say. Every hour worked on it is overtime, and the day page shows a blue Weekly holiday banner.

Holidays

Public holidays are kept in one place: the Holiday Calendar in Tools › Preferences › Payroll Settings, which leave entries and salary use as well. A holiday has no scheduled hours: no one is short for not working it, and anyone who does work it earns overtime for every hour.

4 Work locations & sites

Under Payroll › Masters:

Each slot of a day can carry a job (a job number from your operating modules), a site and a location. Picking a job brings its site, and picking a site brings its location, as in Ritzy 8. These masters only appear while Timesheet is installed.

5 Putting an employee on timesheet

Open the employee in Employee Master and go to the Timesheet tab. Tick On timesheet, then fill in:

FieldMeaning
Working hoursTheir usual time in and time out. Each new day on the sheet starts from these.
BreaksUp to two usual breaks (lunch, prayer). Give both times of a break or neither; a break must end after it starts, on the same day.
Overtime FactorTheir own multiplier, when it differs from the company’s. Leave blank to use the company’s; enter 0 for an employee who is paid no overtime.
Default Site / LocationWhere they normally work. New days start with these.
Work SchedulePeriods (From, To, Hours / Day) that set the hours of a working day for those dates — Ramadan hours, a rotation, a part-time spell. They do not turn a holiday, the weekly holiday or a day off into a working day.
May work from homeThe employee may choose Home when they clock themselves in (section 13).
Allowed Jobs, From – ToThe only jobs the employee can clock in to, between the two dates (both included). Leave the list empty and every open job is offered. Before the start date and after the end date, every open job is offered again; leave a date blank for no limit on that side. The supervisor’s daily sheet is not limited.
Leave is deducted once
An employee on timesheet is not charged for leave by Salary Process. The absence is deducted by Post Timesheet, from the days on the sheet, so the same day off is never deducted twice. Leave entered in Leave Entry still counts towards balances, and pre-fills the sheet; the sheet must then agree with it (section 6). Leave picked on the sheet itself is written to Leave Entry when the month is posted (section 8), so it counts towards balances too.

6 Entering a day

Open Timesheet, choose the department and the date (the arrows step a day back or forward). The payroll month list beside them jumps to a month: to today if it falls in that month, else to its first day.

Timesheet — Operations — 12/11/2026
‹›RefreshCopy Previous DayInsert AllClearClear AllSave
EmployeeJobSiteInOutAttendanceSchedWorkedOTShort
+Sample Employee ALN/1042Berth 407:0018:00Present8.0010.002.000.00
+Sample Employee BLN/1042Berth 407:0014:00Present8.006.000.002.00
+Sample Employee CSick Leave8.000.000.008.00
One row per employee on timesheet in the department. Made-up sample data.

Click Save. The hours are worked out again on the server from the times, whatever the screen showed. The dates already entered this month appear as tags above the grid (green once posted); click one to open it.

Shown is not saved
On a day with nothing saved yet, a banner says Nothing is saved for this day: the times on the grid are each employee’s usual hours, filled in for you. They become the day’s timesheet only when you click Save or Insert All.

Insert All, Leave out, Remove, Clear

ButtonWhat it does
Insert AllSaves an entry for every employee of the department who has none that day: their working hours and breaks, site and location, any leave covering the day, holidays and the work week. Entries already saved are kept. On a holiday, the weekly holiday or a day off it warns that no hours are scheduled, so every hour counts as overtime; click Insert usual hours to go ahead, then Remove anyone who did not work.
Leave out (on a row)For an employee with nothing saved: the row is dimmed and not saved, so they have no entry that day. Add back brings them back.
Remove (on a row)Deletes that employee’s saved entry for the day. Everyone else’s stays.
ClearDeletes every employee’s entry for the department’s day. A cleared day stays cleared: its rows are left out, so the next Save does not write the usual hours back.
Clear AllPick one employee: every entry of theirs in the month shown is deleted, on every day. Other employees are not touched. It cannot be undone, and is refused once the month is posted.

On a holiday or the weekly holiday a blue banner says so. When the day cannot be changed — its month is closed in Accounts, its payroll is posted, or its timesheet is posted — a yellow banner says why and the grid is read-only.

Leavers, joiners and Leave Entry

7 How the hours are worked out

ColumnWorked out as
SchedThe day’s scheduled hours. The work week gives them, and an employee’s own Work Schedule overrides the hours of a working day. A holiday, the Payroll weekly holiday or a day off is always 0.
WorkedTime in to time out over the four slots, less each break that lies inside a slot. A break outside every slot takes nothing off.
OTWorked hours beyond the scheduled hours. On a holiday or day off, every hour worked is overtime.
ShortScheduled hours not worked, whatever the leave type (4 hours worked of 8 is 4 short).
Leave DaysFollow the leave type picked under Attendance: annual and unpaid leave count 1 day, paid leave 0, a deduct-salary type its deduct factor (Absent Half-day 0.5). With no leave type, the shortfall as a part of the day (4 short of 8 is 0.5). A day with nothing scheduled counts no leave.
Worked example
Scheduled 8 hours. Slot 1 07:00–12:00, slot 2 13:00–18:00, break 15:00–15:30. Worked = 5 + 5 − 0.5 = 9.5; OT = 1.5; Short = 0. The 12:00–13:00 gap between slots is simply not worked, so it needs no break.

8 Posting the month to payroll

Open Post Timesheet → Monthly Summary and pick the payroll period. Each employee’s line shows Days, Worked, OT Hrs, Short Hrs, Annual Lv, Other Lv, Salary, Allowances, and the amounts:

AmountFormula
OvertimeOT hours × salary ÷ 30 ÷ 8 × overtime factor
Annual leavedays × (salary + allowances) ÷ days in the month — leave salary is paid separately
Unpaid leave & short hoursdays × salary ÷ days in the month
Other paid leave (sick leave…)not deducted

These are Ritzy 8’s pay formulas, kept as they were. Export saves the summary as a CSV file for Excel.

Post, post again, unpost

  1. Click Post Timesheet. Each employee gets a Timesheet Overtime addition and a Timesheet Leave Deduction in Additions / Deductions for the month, and the month’s days are locked. The leave days on the sheet are also written to Leave Entry, one entry per run of consecutive days of a leave type, so they count against leave balances (see below).
  2. Run Salary Process as usual; the lines are picked up with the rest.
  3. Found a mistake before payroll is posted? Unpost takes the lines out and reopens the days; correct them and post again. Post Again replaces the lines in one step.
When overtime or leave posts nothing
Overtime or leave that comes to 0 writes no line, as in Ritzy 8. Ritzy One says so: after posting, a list names each employee and why, for example …: 6 overtime hours not posted, because the overtime factor is 0 (Employee Master, else Timesheet Settings), or because the employee has no basic salary (no pay line whose payment is marked Basic Pay). If no line at all was written, the message is Nothing was posted to Additions / Deductions. Fix the factor or the pay line, then Post Again.
Timesheet leave in Leave Entry
The entries Post Timesheet writes show in Leave Entry with a blue Timesheet tag and cannot be edited or deleted there: change the timesheet days and post again. Posting again or unposting replaces them. Days already covered by a leave entry made by hand are skipped, as are days with nothing scheduled. The salary deduction stays with the timesheet, so the leave is still deducted only once — even if the employee’s On timesheet option is turned off after the month is posted. Payroll’s own Leave, New Joiner and Leaver deductions never overwrite the lines Post Timesheet wrote.
After payroll is posted
Once the month’s payroll is posted (or the month is closed in Accounts), the timesheet can be neither posted again nor unposted, and its days cannot be changed. Correct it in the next month.

9 Timesheet Reports

Choose the period with the period panel (Getting Started) and, optionally, a department.

Hours by job are the basis for costing labour to a job, outside Payroll.

Verification

The Verification tab is HR’s check of the month before Post Timesheet. It opens on the payroll month that holds today; pick another from the payroll month list, or any range with the period panel (up to 186 days). It needs only View on Timesheet Reports. Choose a department if you like, set Max hrs/day (a day over it is flagged; 16 to start with) and, optionally, an OT limit/month, then click Check.

ViewShows
AttendanceThe default. One row per employee, one cell per day, each a coloured code with a legend: worked, each leave type by its initials (a part-day leave as a split cell), absent with no leave type, missing entry, worked on a day off, weekly holiday, holiday and day off (the work week’s days off); days before joining or after leaving are greyed out. A small + marks overtime and − short hours; hover a cell for the day’s detail, and click it to open that day on the Timesheet screen. Leave days are counted on working days only, as Leave Entry counts them. Each employee has totals (days worked, days of each leave type, absent, missing, off days, scheduled, worked, OT and short hours, pay days deducted), and the total row counts the employees at work each day. Print prints it in colour on landscape pages; Export saves it as CSV.
Month-wisePer employee and month: working days, days entered, missing, leave days, hours, OT, short and the issues found. Click a row to list its issues.
Day-wisePer day: employees expected, entered, missing and on leave, the hours, and the issues; expand a day to see them.
All issuesEvery issue, with its severity (Error, Warning, Info), the check and the detail.

The checks include: missing day, in without out, out without in, out before in, overlapping slots, inactive employee, before joining or after leaving date, not on timesheet, too many hours, monthly OT over the limit, worked on leave, leave that differs from Leave Entry, Leave Entry leave with no timesheet entry, absent with no leave type, hours out of date with the schedule, future date, worked on a holiday or day off, other department, and a posted month changed since it was posted. Filter by severity, check and employee; Only with issues hides clean rows. The link beside an issue opens that day on the Timesheet screen to correct it.

10 Coming from Ritzy 8

Ritzy 8 kept timesheets in a separate TS_<code>.FDB beside the company database. Ritzy One keeps them with the rest of the company.

The hours agree with Ritzy 8’s for practically every imported day. A few things work better:

11 Rights

Rights sit under the Timesheet package in User Manager:

ScreenGive toRights
TimesheetSupervisorsAdd for Insert All, Edit to save a day, Delete for Remove, Clear and Clear All
Post TimesheetPayroll staffPost to post and unpost, Edit for the settings
Timesheet ReportsAnyone who reads hoursView

12 Messages, tips & FAQ

Messages you may see

MessageWhat to do
… already has a timesheet for <date> in department …An employee has one row per day. They were entered under another department that day; change it there, or move them.
… is on the sheet twice.Remove the repeated row and save.
This month’s timesheet is posted to payroll. Unpost it in Post Timesheet to make changes.Unpost, correct, post again.
This month’s payroll is posted. / This month is closed in Accounts.The month is final. Make the correction next month.
No accounting period covers <date>.Create the financial year’s periods in Accounts first.
Choose the overtime payment in Timesheet Settings first…Set Overtime Payment (and Leave Deduction) in Timesheet Settings.
There are no timesheets in this month.Nothing has been entered for the period you picked.
… has … in Leave Entry for <date>. The timesheet cannot record … that day… / The timesheet must record that leave, not hours worked…Set the same leave type as Leave Entry on that day, or change the Leave Entry first.
Nothing was posted to Additions / Deductions / Not posted to Additions / DeductionsThe overtime or leave came to 0. Give the employee an overtime factor, or a pay line whose payment is marked Basic Pay, then Post Again.
Check at most 186 days at a time.On Verification: pick a shorter range.
The … must end after they start, on the same day.On the Employee Master, a working-hours or break end time is before its start.

Someone worked through midnight. How do I enter it?

A slot ends on the same day. Enter the time to midnight on the first day and the rest on the next.

An employee is missing from the sheet.

Tick On timesheet on their Employee Master and check their department.

Why is everything on Friday overtime?

Friday is the weekly holiday in Payroll Settings, is not ticked in the Work Week, or the date is a holiday — each gives 0 scheduled hours.

I cleared a day, but everyone is back with their usual hours.

Those rows are only suggestions (the banner says Nothing is saved for this day). Nothing is saved unless you Save or Insert All; use Leave out on anyone who should have no entry.

Why is a half-day absence 4 short hours but 0.5 leave days?

Short hours are the hours not worked; leave days follow the leave type (Absent Half-day counts 0.5).

Does Timesheet change the salary itself?

No. It only adds the overtime addition and the leave deduction to the month; Salary Process does the rest.

See also the Payroll manual.

13 Employees clocking in and out & working from home

Instead of a supervisor typing the times, employees can clock themselves in and out and say which job they are working on. They do it on the Clock tab of the Ritzy Employee phone app, which they sign in to with their ID No (no Ritzy login is needed). Each punch goes straight into their own row on the day’s timesheet, so the daily sheet, the reports and Post Timesheet treat it like any other entry.

Setting it up

  1. Tick On timesheet on the employee’s Employee Master (section 5).
  2. On the Others tab, tick May sign in to the Ritzy Employee app and give them the password it generates (see section 9 of the Payroll manual).
  3. To keep someone to particular jobs for a while (a project, a secondment), choose their Allowed Jobs and the dates on their Timesheet tab. When the end date passes they see every open job again, with nothing to undo.
  4. For staff who work from home, tick May work from home on their Timesheet tab. Then choose the Home Location in Timesheet Settings (section 3), or create a work location named Home.
  5. Give them the app: the install QR code is on the Ritzy Employee card in Tools › PWA Apps.

What the employee does

The time is the server’s, never the phone’s. A day has four slots, so after four clock-ins the supervisor adds the rest. Every punch is also kept with the phone’s position, when the phone gives one. Phones give a position only when the app is opened over https and the employee allows it; otherwise the punch is saved without one.

How it lands on the sheet

PunchOn the timesheet
Clock in at the officeThe next free slot gets the job, the job’s site (else the employee’s default site), its location, and the time in.
Clock in from homeThe same, except the slot has no site and the Home Location. The hours show and report as worked from home.
Clock outThe slot’s time out. The day’s hours, overtime and short hours are worked out again.
Clock out after midnightThe shift is split: the first day’s slot ends at 23:59 and the next day starts a slot at 00:00.
No clock out within 16 hoursTreated as a missed clock out. The employee is told, can clock in again, and the supervisor completes that day on the sheet.

What the supervisor sees

On the daily sheet, an employee who clocked themselves in has a clock tag beside their name; it is purple with a house for work from home. Hover over it to see each punch, its job, whether it was from home, and a Map link to where the phone was. If someone clocks in or out after you opened the day, Save stops and asks you to refresh, so their punch is not overwritten.

Messages employees may see

MessageWhat to do
You are not on the timesheet.Tick On timesheet on their Employee Master.
You are not assigned to job <job>.The job is not on their Allowed Jobs. Add it, or let them choose one of theirs.
Your job is locked until you clock out.They clock out, then clock in to the next job.
You are not set up to work from home.Tick May work from home on their Timesheet tab, if they may.
Your timesheet for <date> already has four entries.The supervisor enters the rest of the day.
Invalid employee ID or password (signing in)Check their ID No and that the app is ticked on their Employee Master; generate a new password if they have forgotten it.